May 28, 2009
GTX 285 and MacOSX Leopard
Finaly its working, almost an year after first gt200 cards was released
All GeForce GTX 2xx cards works so far
Injector from previous posts should support and identify all gt200/gt200b cards, use it and drivers pkg from irc.osx86.hu #gt200 link in topic.
Comments(84)
hey,
i cant install ur package (ok, i can BUT after rebooting it doenst give me a ROM Revision)
it should say netkas or something, i get a 0x
greets
Will all of the Geforce GTX cards I buy be bootable, on a OS X 86 retail install? before I install these drivers??
///what ? every pc card is bootable on pc.
/// if you mean osx with vesa graphics mode, then make sure there is no injectors/enablers installed before u install drivers
After running the pkg i just get the message that i have to reboot over and over.
Running iPC 10.5.6 with a GTX 280
Forgive my ignorance, but i just installed OS X and i’m clueless. Donation to the person who spoon feeds me the answer! =)
///did u install injector BEFORE isntalling drivers ?
Well thats the problem… since i’m brand new to exploring the OS X, i don’t know how things work at all.
So to anwser your question, did i install injector before installing drivers… I’m guessing no, since i only ran the pkg. What are the steps prior to running the pkg?
Update: Got it to work. But running 10.5.7, need to reinstall to 10.5.6 i read somewhere. Resolution was stuck in 1024×768 and getting error on 3 kext files.
But my GTX280 with 1024RAM gets identified.
Please help me,guys.
I don’t know which driver is ok for my GTX 285.
I’m using Kalyway 10.5.2.
I hope someone will give me a link.
Thanks.
///you have to update to 10.5.7 first, then read this site carefully
Thanks.
I tried to update from “apple software update” but after rebooting i couldn’t get back to the MAC OS X,at all.
I don’t really know how to update from 10.5.2 to 10.5.7 ,without crashing after reboot.
I read about that,and someone said to make another partition runing in parallel with 10.5.2 ,and on the second partition i should install 10.5.7.
Okay,so far …so good..but my question is : how do i have to proceed after i installed 10.5.2 ,to get 10.5.7 on the second partition ?
Do i have to reboot / boot from CD/ DVD in BIOS ?
That’s what i don’t understand.
Please,someone explain it to me,i’m really a n00b.
Thanks again.
Spoke too soon… Quartz isn’t working =(
Used Pacifist to extract the kext files from the file. Then installed the kext files with kext helper, then installed the pkg booted. My GTX280 shows up with 1024MB, but without Quartz support.
If i try to run a game i get the error no 3d device found.
Any ideas?
Solved! With http://aquamac.proboards.com/index.cgi?board=osx86driversandkexts&action=display&thread=838
Guys can anybody confirm that gtx 275 work through DVI but 2560×1600 resolution (DUAL DVI!!).
Please reply if dual dvi works for you (30 inch).
Thanks
Will the new injectors support Geforce GT230?
Thanks
Charles
Umm..
Nvidia have drivers for OS X.
http://www.nvidia.com/object/GeForce_MacOSX_18.5.2f16.html
Is your hack still needed?
does it also works on 260M??? somebody please tell me.
hiii netkas, I’ve installed these driver on 10.5.2 klayway but when i restarted the machine it’s stoped after the gray apple img, my vga card is GTX280 1024, plz help man
What about G210m support? Thx!
where do i get the injector and stuff i cant seem to find it
if some 1 could post a link that would be AWSOME
thx
bump
Please…
anybody can send mi this driver to my email?
Or just give me a link to download. I cant find it on irc channel.
miki_max@o2.pl
finnely. ive got drivers. 😉
Hay is there a way to get dual monitors on the GTX 275 yet.
So I followed instructions correctly, but qe is not supported on reboot. firstly on reboot, it hangs on blue screen or black screen with cursor until i go into safe mode (-x flag) and repair permissions a million times but when its all good im in regular mode and i go to system profiler, finds my 260 GTX, shows correct vram size but says qe is unsupported and scrolling and moving windows is horribly laggy. what the hell is going on? people have reported it working perfect, why isnt it working for me? I deleted NVDAResman.kext for temporary fix but stuck at 1024×768 (graphicsmode=”1280x768x60″ doesn’t work for some reason) which is ok FOR NOW but i need qe support and lag fixed. please post a new tutorial or something or contact me, thank you
idk if this is allowed, my email is shadow_red_dragon@yahoo.com
This is sooo frustrating. I´m so close. OS 10.5.6 works, but my GTX260 does not.
“Injector from previous posts” – where?? “drivers pkg” – irc channel doesn´t seam to work for me (although I am an IRC noob using colloquy).
I feel like I´m so close but yet this post doesn´t help me one bit.
Could it hurt to be more specific? Step by Step? I´m not ungrateful quite the contrary I just am sooo close to having a Mac OS that works…..
The IRC channel dose NOT exists.
Can anyone comment on g210m mobile graphics. the cloest i got was installing the 200 drivers and using enabler and choosing 9000 cards and i got qe/ci in leopard but i get graphical glitches, artifacts and stuff. any help for troubleshooting wold be greatly appreciated
Hello everyone,
Can someone give me a link to the files or even better to a tutorial please. I can’t find the files and I am still new to the hackintosh situation.
Thanks
Hi,
drivers working well, dual display support. However, my benchmarks seem very low, about half what they should be.
Any ideas?
ps. I have tried switching PCI ports, it is in port 1, PCI-E 2.0. same speed as in port 3.
EVGA GTX 285 1GB version
Gigabyte GA-X58A-UD7 Mobo
6GB Corsair RAM
Core i7 2.6GHz
1920x1200x32 (60Hz) Fullscreen
Framebuffer Stabdard
Multisample 4
Anisotropy 16
V1.1 668
V1.2 884
V1.3 838
V1.4 853
V1.5 856
V2.0 464
V2.1 83
V3.0 failed
i required
whats the injector i need to install after the driver install where can i download it ?
Hi, and about retail instalation ? i’ll buy a EVGA 275gtx and running 10.5.8 retail, i’ll have any problem ? this dmg its a kext or just strings on .plist ?
i have a Geforce 210, I get it to work using the GT200.pkg + Nvenabler, ATY_INT BUT!!!! it causes soo much GFX headache the computer freezes loading the dock and any GL stuff.. any help!!
Could anybody please send me this program to 13martins13@inbox.lv ?
I can’t find any link to download it.
I can’t find that file. Could someone please tell me or send me this file. My e-mail is mihail.broker@gmail.com
Than You.
Anyone can say where is the irc channel??
my 260gtx is stuck and i can’t work without him… 🙁
help!!
Thanks!!
thanks a lot