netkas.org

Drivers for Radeons 46×0/45×0/43×0

Latest 10.6.2 update have drivers for 46×0 45×0 43×0 card and we jsut made it to work.




You will need – a beta booter with GraphicsEnabler support for those card and drivers for osx (can find in irc.osx86.hu #radeonhd topic)

4650 – add devid into ATIRadeonX2000.kext after installing drivers, and remember to add your device-id to ATI4600Controller.kext and ATIRadeonX2000.kext after updating to 10.6.2 in future.
4670 doesnt need adding devid to kexts.

4350 – add devid into ATIRadeonX2000.kext after installing drivers, and remember to add your device-id to ATI4500Controller.kext and ATIRadeonX2000.kext after updating to 10.6.2 in future.

P.S. screenshots from 4650 card with DVI display, hdmi didnt work. VGA wasn’t tested, mobility wasnt tested too
P.S.S. this is only for snow leopard.

Comments

  1. Keplenk
    October 23rd, 2009 | 7:30 pm

    Great work Netkas!

    No kext needed? Just the bootloader would be enough?

    Thanks!

  2. Nick
    October 23rd, 2009 | 7:43 pm

    очепятка: jsut -> just

  3. netkas
    October 23rd, 2009 | 8:00 pm

    reread post twice. and until u get просветление.

  4. blogette
    October 23rd, 2009 | 8:36 pm

    You will need – a beta booter with GraphicsEnabler support for those card and drivers for osx (can find in irc.osx86.hu #radeonhd topic)

  5. A7V
    October 23rd, 2009 | 9:07 pm

    Netkas, any hints on support for ATI 5xx0 on 10.6.2?

    ///no support at all

  6. Stoffe
    October 23rd, 2009 | 9:37 pm

    Any idea if this driver will support ATI 4550 ?

  7. frantisheq
    October 23rd, 2009 | 9:38 pm

    does that 45*0 mean possible support for Radeon HD 4550?

  8. solid
    October 23rd, 2009 | 9:41 pm

    and mobility 4570 ( as in dells studio 15 ) ? That would be unbelievably awesome!

    ///mobility wasnt tested, u r welcome to try.

  9. netkas
    October 23rd, 2009 | 9:46 pm

    yes, it means that :P

    what a lazy peoples to look at screenshots

  10. frantisheq
    October 23rd, 2009 | 9:47 pm

    great news! i already gave up on this card. thanks a lot

  11. HawgGuy
    October 24th, 2009 | 1:02 am

    Any benchmarks? My HD 4750 was quite a bit slower than my 9600GT when using the QE_CI_Exotic__cards_1061.pkg kexts.

  12. highlander
    October 24th, 2009 | 7:10 am

    HI

    it might be beginner question

    so this means that 4xxx series can run QE/CI in snow?

    any chance that the 3870 will be able to run QE/CI too?

    is it because of the video card itself (3870) or it is snow leopard and leopard are different OS?

    i am confuse because i can run iMovie 09 with my leopard 10.5.7

    but i cant run with snow leopard
    anyone can explain?

    thanks

  13. Kyu
    October 24th, 2009 | 8:12 am

    Hi,

    I’m just wonder if it will be possible to overclock the 4670 in the new iMac 21’5 ?

    And if yes, how ?

    ///by changing bin_image durring boot time.

    ///but, iirc, 21.5 has only 9400m

  14. Dispnt
    October 24th, 2009 | 9:56 am

    sorry netkas what this parasites ?
    can u explain please!
    thank you

  15. frantisheq
    October 24th, 2009 | 11:13 am

    radeon 4550 – can’t get pass the bootsplash
    i have removed device properties hex string from boot.plist and added graphicsenabler
    replaced ati kexts with those from #radeonhd and boot file
    rebuilt kextchache

    ///what display, vga/hdmi ?

    /// also check if GraphicsEnabler works – boot single user mode and type this
    /// ioreg -l | grep Peregrine
    ///if u have many lines of output, then it worked.

  16. Nick
    October 24th, 2009 | 2:36 pm

    Неткас, ты взломал google translate и дал слову “jsut” значение “только”? xDD

  17. dimitris
    October 24th, 2009 | 3:00 pm

    i’ve got the hd 4670 GPU. i can’t connect to irc to grab the files.. is there any way i can get the files. also tryed without the kext and just got blank screen

  18. frantisheq
    October 24th, 2009 | 3:55 pm

    i have fixed DSDT so i don’t have to use -pci1.
    ioreg -l | grep Peregrine gave me no output at all. i have discovered that even if there is no gui on the display the login screen is running because i have entered my password and after i pushed Return HDD started to work just like when i normally login.
    there is no difference if use DVI or VGA. can’t try HDMI.
    messages from chameleon:

    ATI VGA Controller [1002:9540] :: PciRoot…
    old pci command – 3
    boot display – 1
    Not going to use bios image file
    Found bios image
    Adding binimage to card 9540 from legacy space with size 10000

  19. zoliky
    October 24th, 2009 | 4:14 pm

    Any news about 8500GT/8800GT? As far as I know 10.6.2 breaks the compatibility with both cards.

  20. pipko
    October 24th, 2009 | 7:07 pm

    and for mobility ?
    *(mobility 4570)

  21. October 24th, 2009 | 7:20 pm

    why all of you don’t look at the attached screen shots, then do some googling, instead asking already answered questions? and then if you give up, just go to the nearest store and get a brand new 9800 GT? :)

  22. pipko
    October 24th, 2009 | 9:37 pm

    I looked at all the pictures and google but nothing for mobility, (mobility 4570)

  23. Meilo
    October 25th, 2009 | 7:37 am

    Worked on my 4650! Although only vga. It’s a Sapphire 4650 with DVI+VGA ports (ID 9498), I get black screen from DVI and VGA ports but using DVI -> VGA dongle i get video output on the VGA (from card) port. Is there a way to get video from the DVI port?

    And thanks a lot! Been using a 7600GT with 256MB for SL and 4650 for win7…

  24. morfy
    October 25th, 2009 | 9:59 am

    hi netkas. This is the error that gives me the opening of the hack.
    http://img2.imageshack.us/img2/1750/img0512g.png

    help me please.

  25. dono
    October 25th, 2009 | 10:50 am

    could you share 4670 driver on RS or other file share sites rather than on IRC which I don’t know how to use pls. thanks a lot!

  26. djyou
    October 25th, 2009 | 10:52 am

    why i can`t see the screenshot?does anybody test it in leopard?

  27. petremetre
    October 25th, 2009 | 11:26 am

    for HD 4670 vga, dvi, or hdmi isn’t working, or even an old monitor with only vga input.
    also removed the unnecessary vendor ids from 4600 controller but still isn’t working. Original files by netkas (Ati4x00Controllers, Boot, etc..) here http://rapidshare.com/files/297629498/ATI4x00Controllers-Boot-Netkas_Beta.zip

  28. Meilo
    October 26th, 2009 | 7:17 am

    @petremetre Did you try to plug your monitor to the VGA port of your card AND plug a DVI to VGA dongle on the DVI port? That’s how it worked for me.

  29. petremetre
    October 26th, 2009 | 12:55 pm

    @ Meilo. no i didn’t try that. i don’t have a convertor (only v’got hdmi->dvi). my monitor has 2 outputs 1 hdmi and 1 vga. in both ports didn’t work. i don’t know why, i just get a blank screen, thats a good thing i supose because it shows that something is going on. i think that the solution is in ATISupport.kext. Also i tryed to remove all the apple unnecessary ketxs ati1000.. and what i found out is that snow leopard recongized the gpu but only in vesa mode

  30. tdtan1025
    October 26th, 2009 | 5:54 pm

    I have an innocent and maybe naive question:
    Is there a legal issue for manufacturers of graphics cards such that they cannot write device drivers for OSX? It seems the only possible explanation for some of the most popular card lacking OSX kexts. Can somebody explain?

    ///I think they have agreement with apple for writing some drivers with needed support

  31. morfy
    October 26th, 2009 | 6:58 pm

    @Meilo:
    I use a VGA to DVI adapter connected to the card, but gives me a black screen at startup and confused: how did you get it working? You can upload your kext to try?

  32. Meilo
    October 27th, 2009 | 2:27 am

    @morfy:

    I installed the files from IRC that netkas posted with Kext Helper b7 and the new beta boot posted at the start of this post, nothing more. My card has 3 ports: DVI, VGA and TV OUT. Both VGA and DVI gives me a black screen too if I just plug my monitor to any of those.

    However, I got it to give me video output by connecting my monitor to the VGA port of the card AND a DVI -> VGA adapter to the DVI port (so you end up with two VGA ports, plug your monitor to the card’s VGA port, not the adapter).

  33. tarek
    October 29th, 2009 | 10:22 pm

    thx guyz for this awsome news i tried ur method but it didnt work it corrupted my snow leopard boot1 bcz of the beta boot i fixed it by reinstalling my 7 mbr (removing snow partition) :( but the problem is the boot didnt work with my dv7 2000 after installing ur files i will try tomorow without the boot file any hope can i just install the 4500 kext file without anything else ?
    ps: i have 4530 mobility so i dont know if it will work the device id is built in i hope it works

    finally : if theres hope just give me one step or the full steps cause i know no one around here so ill be gratefull for any help thx :)

  34. mildcat
    October 29th, 2009 | 10:36 pm

    i used radeon 4670 on 10.6.1 with below kext, also black screen.

    Radeon 45×0-48×0 kext for Late 2009 iMac
    http://www.mediafire.com/?im3m2ddmwkg

  35. theokrontos
    October 30th, 2009 | 6:18 pm

    Will this work with Kalyway 10.5.2 ?? and how to install beta bootloader ?

    ///no

  36. Stoffe
    October 30th, 2009 | 10:45 pm

    My Gigabyte 4550 works OTB with these drivers and the new Bootloader.

    The DVI/HDMI/VGA output isn’t working perfect though.
    Since I use HDMI to my TV I have to connect either the VGA or DVI port to something to get a picture.

    Anyways I’m happy it works.

  37. Meilo
    October 31st, 2009 | 4:21 am

    Update:

    Did a fresh vainilla install of SL and installed the kexts and boot but forgot to add the ID of my card to ATIRadeonX2000.kext. After the reboot, i got a black screen (I was using a DVI->VGA adapter) so I unplugged everything from my card and connected my monitor to the DVI port (was gonna start up win7). By accident pc boot into SL again and there was video (with the dvi port).

    So i added the ID of my card to the kext, did another reboot and I had video working using the DVI port. Not sure why it didn’t work the first time but I can confirm it works on my 4650 1GB card with DVI+VGA+TV OUT ports.

  38. Ambidex
    October 31st, 2009 | 8:48 am

    will the mobility 4570 work?

    ///no mobility

  39. morfy
    October 31st, 2009 | 1:04 pm

    @Meilo

    What video card do you have? Mine is a Sapphire Ultimate 1GB DDR2 (HDMI – DVI – VGA)

  40. theokrontos
    November 1st, 2009 | 11:10 am

    I have got the files. but i donno how to install them. Please help i am new to mac.

  41. Keplenk
    November 1st, 2009 | 1:53 pm

    @Meilo:

    That is good news. It looks like you are the first recorded person to actually make the 4650 run in osx86. Mind if you share the exact model of your video card? I hope it is a low profile ready card.

    More importantly, since it was “by accident”, can you recreate the installation? If you have a spare hdd, maybe you could use that and try all over again.

    Are QI/CE fully working? Do you have the bug like the real iMacs have (Slow Flash videos + slow flash games + slow watching HD). Or maybe any other bugs that you noticed?

    Thanks

  42. Hadi
    November 1st, 2009 | 6:31 pm

    hi every one, I hope you can help me with this Ati.
    Its Hp Pavilion DV6-1341eo
    I can only install iDeneb v1.3 (1.5.5) and can update to 10.5.8
    But graphic cart not working, it shows this:

    Display:

    Type: Display
    Bus: PCIe
    PCIe Lane Width: x16
    VRAM (Total): 256 MB
    Vendor: ATI (0×1002)
    Device ID: 0×9480
    Revision ID: 0×0000
    Kernel Extension Info: No Kext Loaded
    Displays:
    Display:
    Resolution: 1024 x 768
    Depth: 32-Bit Color
    Core Image: Software
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Not Supported
    QuartzGL: Supported

    ————————-

    Graphic card
    Ati Mobility Radeon HD 4650
    PCI\VEN_1002&DEV_9480&SUBSYS_3628103C&REV_00
    PCI\VEN_1002&DEV_9480&SUBSYS_3628103C
    PCI\VEN_1002&DEV_9480&CC_030000
    PCI\VEN_1002&DEV_9480&CC_0300

    Device Instance Pth
    PCI\VEN_1002&DEV_9480&SUBSYS_3628103C&REV_00\4&58D67EE&0&0008

    Siblings:
    PCI\VEN_1002&DEV_AA38&SUBSYS_3628103C&REV_00\4&58d67ee&0&0108

    Resources:
    Memory Range
    00000000C0000000 – 00000000CFFFFFFF

    I/O:
    7000 – 70FF

    Memory Range:
    00000000DA000000

    IRQ:
    0xFFFFFFFE(-2)

    I/O Range:
    03b0 – 03BB

    I/O:
    I/O Range:
    03C0 – 03DF

    Memory Range:
    00000000000A0000 – 00000000000BFFFF

    ———————————-
    Please helpe me on this.
    Thanks

    ///repeating gazillionth time – radeon mobility doesnt work. wait for Dong to write proper framebuffer.

  43. SilentViper
    November 1st, 2009 | 8:01 pm

    Netkas, Great job on the drivers, one main question, is 10.6.2 required for these to work properly?

    because my Mobility Radeon HD 4650 is recognized as a 4600 series blah blah blah

    my computer boot fine from a leopard install disk using cpus=1, and everything works ok, but when i do and osinstall.mpkg the ps2 doesn’t work and i have to boot in safemode.

    Do you have any suggestions? honestly i just want the screen to work in normal(non-safe) boot, so that my Wifi works, QE/CI isn’t a must here.

    ///mobility DOES NOT work

    Thanks if IRC is a better place to ask you these questions just say so or pop me an email

  44. SilentViper
    November 1st, 2009 | 8:02 pm

    because my Mobility Radeon HD 4650 is recognized as a 4600 series blah blah blah

    Thats in safe mode, forgot to mention

  45. tarek
    November 1st, 2009 | 9:44 pm

    Confirmed mobility didnt work with me man i hope someone tries to tell me how to get my snow begin with 1600x900x32 cause it always go to 1182×890 something and when i play a movie it lags too much thats my only problem i dont care about movies i want to make my resolution go to 1600×900 anyone plz guide this young man :)

  46. Meilo
    November 2nd, 2009 | 4:35 pm

    @Keplenk:

    I do have spares HDs, I will install SL the same way I did and report back later with the info on the install, my card model and if the bugs are present or not. My guess is youtube for flash videos? any suggestion for flash games? and watching HD, I did try some 720p and 1080p movies without problems but I think I used VLC, not quicktime.

  47. keplenk
    November 2nd, 2009 | 6:33 pm

    @ Meilo

    Yeah, if you just have spare time and recreate what you did, that would be of great help to a lot of 4xxx owners. I’m still holding my 4650 purchase. I just want to make sure that when I buy it, it would work :D

    Yes you are correct, flash videos are youtube clips. With flash games, if you have facebook, you can try and search for Bejeweled Blitz 2 or 3 or if you don’t have an account you can try it here:

    http://flash-games.ca/arcade/bejeweledBlitzv32Th.swf

    The reason I ask is because some owners of the new iMac with 4670 has this problem. I even went to one Apple store and I actually confirmed the issue. The weird thing is, the other imac right beside the one I’m using doesn’t have that problem. So I guess that not all new iMacs have it.

    Good luck on recreating the installation. I hope you get the technique

  48. mluke
    November 3rd, 2009 | 5:12 am

    Since I see no comments on any 4350 cards, got an MSI one working without too much trouble, except ATI4500Controller.kext didn’t install the first time I tried (or maybe I missed it somehow). It did take a lot of googling for me to figure it out, and familiarity with linux eased the pain.

    Thank you very much to everyone involved!

  49. Meilo
    November 3rd, 2009 | 3:52 pm

    New SL install worked as well.

    Installed SL on a spare HD, a vainilla install. After the setup part of SL, once I was in the desktop, did this:

    - Installed the kexts posted here with “Kext Helper b7″ using it’s “easy install” mode.
    - Replaced the “Boot” file on my SL HD with the beta Boot posted here.
    - Reboot
    - Once back in the desktop (at this time I had full res, but no QI/CE), copied ATIRadeonX2000.kext from “SL HD/System/Library/Extensions” to the desktop.

    - Right click on ATIRadeonX2000.kext (on the desktop) to “Show Package Contents” and under “Contents” edited “Info.plist”.

    - Under “IOPCIMatch” there is “0×94001002 0×94011002 0×94021002 0×94031002 0×95811002 0×95831002 0×95881002 0x94c81002 0x94c91002 0×95001002 0×95011002 0×95051002 0×95071002 0×95041002 0×95061002 0×95981002 …. ” . Replaced last one for the ID of my card, which is “0×94981002″ . You can check the ID of your card in “About this mac” -> More Info -> Graphics/Displays, your Device ID will be something like “0×9498″ and Vendor will be “ATI (0×1002)” , so the ID you need to put in the Info.plist is “DEVICEIDVENDORID”, or 0xXXXX1002 .

    - Saved the Info.plist, closed all windows, then installed the (edited) ATIRadeonX2000.kext on my desktop with “Kext Helper b7″, again, using easy install mode.
    - Reboot and everything working!

    On the tests (did on both old and new installs):
    - Youtube videos play fine, HD and fullscreen.
    - Quicktime (new) plays 720p videos fullscreen smooth, no problems here.
    - VLC plays 1080p mkv files smooth too (full 26+GB rips of some of my BD discs I have on an external HD for the WDTV).
    - No problems with flash games either.

    My card is a Sapphire Radeon HD 4650 1GB/DDR2 with DVI+VGA+TV OUT ports, came with a DVI -> HDMI adapter (that I don’t use). Couldn’t find the exact model on the box but I believe it’s this: http://www.sapphiretech.com/presentation/product/?psn=000101&pid=187

    Only thing I noted is that video sleep doesn’t work. I set up the screensaver to kick in first then to put the monitor to sleep, but instead the screen just freezes (screensavers work fine). If I move the mouse or hit a key, monitor “comes out” of sleep and back into the desktop. Tried different time combos and always happens the same, so for now, I disabled it and just let the screensaver on and manually turn off the monitor if I’m gonna be afk a long time.

    Good luck on your tests and hope this helps other 4650 users.

    PS. Always had monitor on the DVI port, nothing more plugged into the card.

  50. keplenk
    November 3rd, 2009 | 6:33 pm

    :(

    Oh crap!

    I just went to a retail store and bought a 4650 low profile card and it does not work. A dud! It was defective to begin with.

    To make things worst, the card destroyed my PCIe x16 slot. My old card now does not work either but It works with my other PC. Now, my motherboard needs replacement :(

    Anyway, that is fine since it still under warranty (and I was also having USB problems with the board) but it will take 3 – 5 weeks. So I have to wait to check if it will work in osx.

    Oh well, talk about bad luck.

    Thanks for the guide Meilo, too bad I can’t test it yet.

  51. night_rider
    November 9th, 2009 | 5:58 am

    Appreciate advice on installing 4670. Currently getting ..

    ** Device in slot: Slot 1 **
    ACPI_SMC_PlatformPlugin.kext – waitforService(resourceMatching(AppleIntelCPUPowerManagement) timed out

    Full details here:
    http://www.insanelymac.com/forum/index.php?showtopic=195569

    Thanks.

  52. b-boy-g
    November 9th, 2009 | 11:14 am

    When I replace the “boot” file with the original “boot” file in “/” the system crash at start up :( How exacly I need to “install” this boot file please?

  53. night_rider
    November 10th, 2009 | 5:57 pm

    @#51

    Now getting black screen on VGA/DVI as others.

    2 stupid mistakes:

    1. was booting from a production EFI partition instead of my test EFI partition with all my changes.

    2. did edit /Extra/com.apple.Boot.plist but forgot /Library/Preferences/SystemConfiguration/com.apple.Boot.plist which was where OSX86 Tools copied my EFI strings for my 7900GS.

    #2 was causing my boot hangs. Hope my confessions of stupidity help others.

    Next steps my be 10.6.2 since it’s supposed to work on DVI.

  54. MonkeyDLuffy
    November 10th, 2009 | 10:33 pm

    It seems that some cards work and some does not.

    For those people who made it work for the 4650, could you please post your exact model name or maybe links.

    I’ll also share that my recently purchased card

    http://www.newegg.com/Product/Product.aspx?Item=N82E16814121340

    ASUS EAH4650/DI/1GD2/A(LP)

    does NOT work.

    I tried all things that needs to be done and I think I did not miss anything. It just does not work. I’m suspecting that ATISupport.kext and/or Framebuffer is the one causing the black screen. Hoping for a patched kext soon.

    Future buyers beware, make sure it works first. Returning to newegg in 10 days.

  55. maclover
    November 13th, 2009 | 2:59 am

    Can please someone confirm that the QE/CI is working for HD4350 on 10.6. Many thanks….

  56. linjunfeng
    November 14th, 2009 | 3:21 pm

    ati hd 4350 can not be driven ah

  57. MonkeyDLuffy
    November 15th, 2009 | 9:15 pm

    Any updates? Or anybody found a solution for the Black screen problems (monitor going to sleep?

  58. Antuanix
    November 16th, 2009 | 11:12 am

    I have a radeon HD4670 1Gb/DDR3 and SL recognizes it as an HD 4850, here is the output from System Profiler:

    Chipset Model: ATI Radeon HD 4850
    Type: spdisplays_gpu
    Bus: PCIe
    Slot: Slot-1
    PCIe Lane Width: x16
    VRAM (Total): 1024 MB
    Vendor: ATI (0×1002)
    Device ID: 0×9490
    Revision ID: 0×0000
    ROM Revision: 113-B7710C-176
    EFI Driver Version: 01.00.318

    With the 10.6.2 update the card is working fine with QE/CI included, didn’t have to touch any plist or change anything, it just worked (had to take out the sleep enabler extension)

    The problem is that only the vga output works and not the DVI, so no dual monitor for me.

    Any chance of making dual monitor work? many thanks

  59. wmarsh
    November 19th, 2009 | 4:08 am

    Mobility HD 4330 does work
    QE/CI works
    Cannot change resolution except with com.apple.boot.plist
    Dong’s latest framebuffer does not work; give KP

  60. fu1688
    November 19th, 2009 | 4:53 am

    OK………

  61. November 20th, 2009 | 1:03 am

    Hey, netkas, Im also receiving this error:

    -> http://img2.imageshack.us/img2/1750/img0512g.png

    Im pretty sure it’s a dummy error. Can you plz point me a direction?

    —-Below—-

    kxld[com.apple.kext.ATI4600Controller]: The following symbols are unresolved for this kext:
    kxld[com.apple.kext.ATI4600Controller]: __ZN12ATIConnector13getActiveDpcdEv
    kxld[com.apple.kext.ATI4600Controller]: __ZN12ATIConnector16getConnectedDpcdEv
    kxld[com.apple.kext.ATI4600Controller]: __ZN12ATIConnector16getInfoStructureEv
    kxld[com.apple.kext.ATI4600Controller]: __ZN12ATIConnector19getConnectionNumberE16ConnectionNumber

  62. Andy
    November 20th, 2009 | 5:53 am

    I have two 4550′s I have managed to get one of them working but not the other, can anyone shed light on why SL is not detected the other card at all?

  63. G34
    November 26th, 2009 | 4:37 pm

    I have a FORCE 3D ATI RADEON HD 4650 1 GB DDR2 VGA+TV+DVI, works perfect in 10.6.2 but I have DVI output only.

    To use with VGA monitor I’ve removed GraphicsEnabler string in com.apple.boot.plist and installed EVOEnabler.kext (no more DVI output).

  64. koko
    November 27th, 2009 | 3:15 am

    4670 works with VGA output with correct setup

    http://www.insanelymac.com/forum/index.php?showtopic=199313

  65. avi
    November 28th, 2009 | 10:42 am

    Hi ,

    I’ve tried to install SL on my computer with ATI4300HD.
    But when the system tries to run I’m getting a weird screen with no actual photo.

    http://i818.photobucket.com/albums/zz103/a…19112009014.jpg

    Pls see if you can help me ?

    Thx

  66. Billy
    November 28th, 2009 | 10:13 pm

    Hiya! Thank you for a clear and easy solution, I almost hit the wall with my HIS 4870 before I saw PCEFI 5 solution with GraphicsEnabler.

    One small question: if I boot with this option, no QE/CI is working. If I omit it, the ATIRadeonX2000 leads to kernel panic. My old X1950pro was working with QE/CI, so I maybe didn’t clean something up before installing your booter? Can you please throw me a hint?

  67. niko_0408
    November 29th, 2009 | 11:42 am

    Hey Guys, does anyone get it work on a Gainward HD 4650 1Go PCIExpress??
    With the BetaBoot, I have this in the More Info :

    ATI Radeon 4650 Series :

    Jeu de composants : ATI Radeon 4650 Series
    Type : Processeur graphique (GPU)
    Bus : PCIe
    Logement : Slot-1
    Longueur de la voie PCIe : x16
    VRAM (totale) : 256 Mo
    Fournisseur : ATI (0×1002)
    Identifiant du périphérique : 0×9498
    Identifiant de révision : 0×0000
    Révision de la ROM : 113-B7710C-176
    Version du gestionnaire EFI : 01.00.318
    Moniteurs :
    Moniteur de type inconnu :
    Résolution : 1280 x 1024
    Profondeur de pixels : Couleurs 32 bits (ARGB8888)
    Moniteur principal : Oui
    Miroir : Désactivé
    Connecté : Oui
    Connecteur pour le moniteur :

    Thanks for all Netkas

  68. TheCONDOR
    December 5th, 2009 | 1:59 pm

    Thanks Netkas!!!

    Sapphire 4650 1gb DVI+HDMI+VGA works! (id 9498)

    I’ve used your driver in this mode (monitor in dvi) :

    GraphicEnabler = Y in com.boot.plist on my flash drive
    your ‘boot’ file in the root of the usb flash drive

    booted and installed your kext with kexthelper

    rebooted

    modded the ATIRadeonX2000.kext with my dev-id
    modded theATI4600Controller.kext with my dev-id

    rebooted and… black screen… fuck it!

    so i’ve found HDMI cable and connect my ViewSonic LCD monitor just for try…. and it works!!!!!!!!!!! :)

    Full resolution (1080p), render info correct in OpenGL extension and also vga ram is correct!

  69. TheCONDOR
    December 5th, 2009 | 3:00 pm

    i’ve made other test:

    needed dvi+hdmi to works. And the signal exit not from HDMI connection but from DVI. So HDMI needed for something like ‘recognize’ the monitor.
    HDMI connectedo to my hdmi monitor port and dvi to my dvi monitor port, and the system use this one.

    Tomorrow i can try with a hdmi-dvi adapter instead of the cable.

    With only hdmi cable it doesn’t work, and also with the hdmi cable connected only to the VGA card… the hdmi port must receive a valid link, not a died one.
    I think hdmi-dvi adapter ‘validate’ the link itself.

  70. sikabayan
    December 5th, 2009 | 4:09 pm

    i’m running SL 10.6.2 (beta booter, Chameleon 2RC3) in Vostro 1088. everything’s okay but my ATI HD4330 512MB.
    The card is detected but i cannot change the resolution (1024×768). My native display is 1366×768.

    Here’s from SYSTEM PROFILER:

    Hardware>Graphics/Displays:
    ATI Radeon 4300 Mobility Series:
    Chipset Model: ATI Radeon 4300 Mobility Series
    Type: GPU
    Bus: PCIe
    Slot: Slot-1
    PCIe Lane Width: x16
    VRAM (Total): 256 MB
    Vendor: ATI (0×1002)
    Device ID: 0×9552
    Revision ID: 0×0000
    ROM Revision: 113-B7710C-176
    EFI Driver Version: 01.00.318
    Displays:
    Display:
    Resolution: 1024 x 768
    Pixel Depth: 32-Bit Color (ARGB8888)
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Display Connector: -

    Hardware>PCI Cards:
    ATI Radeon 4300 Mobility Series:

    Name: ATY,Peregrine
    Type: display
    Driver Installed: Yes
    Bus: PCI
    Slot: Slot-1
    Vendor ID: 0×1002
    Device ID: 0×9552
    Subsystem Vendor ID: 0×1028
    Subsystem ID: 0×0403
    Revision ID: 0×0000
    Link Width: x16
    Link Speed: 2.5 GT/s

  71. Third
    December 7th, 2009 | 12:42 am

    So thank you Netkas for these drivers :D

    Well, after changing the DevId (0x954f1002) with those of my ATI Radeon HD 4350, installing the kexts X2000 kext + the + the beta and I reboot the computer. SL boot with the boot flags cpus = 1-x32-v. Different scrolling text on the screen, and it ends with this message

    ** Device in slot SLOT – 1 **
    ACPI_SMC_PlatformPlugin:: start – waitForService (ressourceMatchingAppleIntelCpuPowerManagement) timed out

    Normally, with my Intel GMA 950 after this text, I see my desktop, but nothing happens. I hear “scratching” the drive but nothing …

    I hope a solution …

    Netka thank you again;)

  72. Ruslan
    December 10th, 2009 | 2:01 pm

    Thanks Netkas for your time and great job you do!

    Could you please point to the right direction how to enable 1680x1050x32 resolution? Display settings shows only 1400×1050 and next 1600×1200.

    Here is my details:
    SL 10.6.2
    ATI Radeon 4670
    Bus: PCIe
    VRAM (Total): 1024 MB
    Vendor: ATI (0×1002)
    Device ID: 0×9490
    Revision ID: 0×0000
    ROM Revision: 113-B7710C-176
    EFI Driver Version: 01.00.318

    I’m currently using your beta bootloader + modded ATI4600Controller.kext + original ATIRadeonX2000.kext

    Cheers

    ///is it vga display?

    ///if you can change resolution in osx(not in booter menu), then you can try switchresx to add missing resolutions.

  73. Slava_sa
    December 11th, 2009 | 4:22 pm

    Неткас, как поставить kext на Ati HD4650

  74. rebel6
    December 12th, 2009 | 2:25 pm

    G34 thanks for your post i did exactly the same thing and it works after many many tries
    thanks!

  75. jaxtrip
    December 15th, 2009 | 3:45 pm

    Hello, great write up,

    Just got my Diamond 1GB 4670 working, HDMI only though,

    Booloader + 4600 kext + add “graphicsEnable = Yes” to com.apple.boot.plist

    When looking at the available resolutions I see 1080P as an option (whick I am using to view on my HDTV), but 1680×1050 is not an option (which is what my monitor uses). I believe this is the blank screen issue, I am going to try to add 1680×1050 this afternoon and see if my monitor displays.

  76. Ruslan
    December 17th, 2009 | 2:38 am

    Hi Netkas,

    Thanks for advice, I’ve managed to add missing resolution using SwitchResX. Yes, currently I use VGA (Dell 2209WA)

    Another problems may be you can help with:
    1. I can’t get DVI and HDMI working
    2. Final Cut Studio installer says “… this system has only 0 MB of VRAM.” and “.. requires Quartz Extreme capable video card.”

    I’ve tried to delete ATIRadeonX2000.kext, didn’t make any difference.

    What else can be done to get all running properly?

    Cheers,
    Ruslan

  77. Peter Petrelli
    December 17th, 2009 | 10:37 am

    Hi there! I have the ATI HD4550 and I been having a lot of troubles getting my video card to work.

    I have tried to apply the “boot” from the “beta booter” file in the Extra/i368 folder of the Bootloader (Chameleon RC4) to replace the “boot” file that is already there, or how can I “install” it or where do I have to put the “boot” file?

    Please!, help me out with this thing
    Stoffe, what did you do to make it work? Running on 10.6.2?

    Thanks in advance for your help

  78. foto
    December 17th, 2009 | 11:03 am

    I have a core I5 750, Gygabyte p55 UD3, 4GB ram , 500GB hd
    Ati 4650 1GB
    I want to install osx SL in a second partition, in the first I have windows 7
    I have a retail disk 10.6.0
    where can i find a detailed guide?
    i can’t find irc.osx86.hu #radeonhd topic

    can you help me, pplease?

    sorry for my english

  79. sumi
    December 28th, 2009 | 1:10 pm

    Hello Netkas,
    I have one basic question.
    You mentioned that 10.6.2 release supports ATI 45xx series Graphics cards for Desktop.What does this mean?Will the ATI HD4530 512 MB card on my Dell Laptop be supported or not? I specifically asked since you mentioned about Desktop.
    Also in 70th comment on this page by sikabayan,he mentioned about Vostro 1088 with ATI HD4330 512MB card.I think it is laptop.So I think my laptop having HD 4530 card also should work right?Please do reply.

  80. Giano
    December 28th, 2009 | 8:07 pm

    Great! But how the heck do you use the beta booter… you dont show how. please post link or email me . :) Thanks!

  81. Frankie
    December 29th, 2009 | 10:31 am

    hi there/ how i can make work my radeon hd 4570 mobile help please. what i need to do?

  82. January 2nd, 2010 | 5:48 pm

    Hi wmarsh,
    how did you get your mobility hd 4330 to work?

    Just adding device id or something?

    Thank you!

  83. pastrva
    January 3rd, 2010 | 4:13 am

    Hello Nektas,

    I have a Sapphire HD4670 Ultimate as second gfx in pciex4 slot, beside a 9800GT.
    To get osx10.6.2 started I had to remove ATIRadeonX2000.kext.

    Starting with EFI10.5 and Chameleon 2RC3 but the gfx is not recognized. System profiler shows just:
    Typ: GPU
    Bus: PCIe
    PCIe-Lane-Breite: x4
    Hersteller: ATI (0×1002)
    Geräte-ID: 0×9490
    Versions-ID: 0×0000

    beta booter installed, graphicenabler in .plist

    If you can give me any hints.
    Do I have to look for original ATI4600.kext or other.
    any help needed i am stuck.

  84. pastrva
    January 3rd, 2010 | 10:59 am

    I see that the ATI4600Contoller.kext is loaded, but still does not recognize tha card

  85. piero
    January 5th, 2010 | 1:49 pm

    Hi,

    problems with the HD4670 on a 10.6.2 64bit.

    1. EFI 10.5, original Kext

    NO DVI, ONLY VGA, monitor isn’t recognized and 1680×1050 doesn’t work. Graphics Mode and SwitchResX didn’t help. Didn’t try HDMI or VGA2DVI.

    here the profiler:

    ATI Radeon 4600 Series:

    Chipset Model: ATI Radeon 4600 Series
    Type: GPU
    Bus: PCIe
    Slot: Slot-1
    PCIe Lane Width: x16
    VRAM (Total): 1024 MB
    Vendor: ATI (0×1002)
    Device ID: 0×9490
    Revision ID: 0×0000
    ROM Revision: 113-B7710C-176
    EFI Driver Version: 01.00.318
    Displays:
    VGA Display:
    Resolution: 1600 x 1200 @ 60 Hz
    Pixel Depth: 32-Bit Color (ARGB8888)
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Rotation: Supported
    Display Connector:
    Status: No Display Connected

    2. Beta Boot: NO DVI, NO VGA, HDMI don’t know

    do I miss something or there’s something else to try? could a efi-string help?

    thank’s for the help,

    piero

  86. piero
    January 8th, 2010 | 7:42 pm

    Hi,

    something new on the HD4670.

    Boot 10.5: no HDMI
    Beta Boot: HDMI works great, all Resolutions are fine, QE/CI working.

    thanks a lot,

    piero

  87. localhost
    January 10th, 2010 | 10:21 pm

    everything works great on my saphhire 4670 but can’t get the god damn sleep function work,my card works on hdmi port, some strange thing was happening when try the sleep button, only cpu cooler was running and i switched from hdmi port to dvi and got my screen back, but only one time because if i repeat that move screen image never come back..its stuck
    i have instaled SL from hazard iso with chameleon rc4

    msi p35 saphire hd 4670 acpi =s3 enable

  88. timewise
    January 11th, 2010 | 12:38 am

    I am using HIS H467QS1GH Radeon HD 4670 1GB.
    My device ID’s are 0xaa38 and 0×9490 (according to ubuntu 7.04).
    VGA & DVI does not work. Please!!!

  89. January 11th, 2010 | 4:50 pm

    where do i donate money?

    ///there is no way, crappy paypal ;(

  90. jsfullr
    January 11th, 2010 | 6:22 pm

    HD4670 works great with 10.6.2 however VGA output only anybody know how to get this to work for DVI?

  91. January 12th, 2010 | 2:58 pm

    amd opteron 4core 2ghz
    ATI 4670 VisionTek !GB
    osx 10.2 vanilla/empire install, then swapped vanilla kernel for modbin kernel v7

    I should change the bootloader to your beta, and add the 4600 kext from 10.6.2? Ill try it and post results:)
    thx for the efforts!

  92. nmarques
    January 15th, 2010 | 9:04 pm

    Hey Netkas,

    I hope you dont get pissed with a “n00b” question, but I need to fire it up.

    I’ve installed Hazard SL 10.6.2 combo patch. Everything works perfect, except for the graphics adapter which should be supported under ATI4500Controller (the infamous 4570).

    Through trial and Error I got to know the following:

    ATISupport.kext is the first extention being loaded, and from there it should the ATI4500Controller and ATIRadeonX2000.kext (both having the dev_id). Well the ATI4500Controller doesn’t load :(

    If I _DONT_ remove ATIFramebuffer.kext, the system gets into a black screen after the apple logo loading screen. The system appears to be working as there’s some ocasional disk activity.

    Removing ATIFramebuffer.kext, I get to load the system fully and use Apple Framebuffer (crappy stuff, makes me remind of some old 2.4.x Linux kernels when Banshee and i740 came out).

    You said before Mobility wasn’t supported. I can’t go against that, but do you know what is on the source of this ?

    I have a running system at least, so I can dig up some more stuff.

    Thanks in advance.

  93. January 20th, 2010 | 6:26 am

    since no one talk about 4350
    I get my ASUS EAH4350 Works without any problem with DVI-port.

    QE/CI confirmed with Transparent menu and Dashboard Ripple effects.

    Million thanks for the driver….

  94. R3N3G4D3
    January 26th, 2010 | 11:09 am

    netkas,

    I’m very curious about the fact that betabooter and EFI_10.5 enable different ports (as piero mentioned above). This implies that the bootloader has some say about which ports get activated and with some tweaks I might be able to get all of my 4650 ports recognized (VGA, DVI, HDMI). By looking at EFI_10.5 source I noticed that ati.c specifies 2 connector types using 4 1-byte numbers (I’m not sure what these numbers correspond to). Could you provide the source for betabooter so I can try to understand the differences between the ports configurations of the two?

  95. el Charlot
    January 26th, 2010 | 2:07 pm

    Hi, I really don’t know where to post my question, because forum registrations are closed, and I tried to search an answer here and there for days but as I’m not a technician, and english is not my native language, I can have missed it :) .

    I use a 4890 with the drivers you provide (so not flashed). It works perfectly, with all programs, except one game, Dragon Age (cider port). The screen just goes black. If I select my second monitor as my main monitor (he’s plugged on the old 7300) it works on it, but still not on the one plugged to the 4890.

    I’m probably getting things wrong, but the company that made the game refuse to help me because “there’s no such thing as 4890 on mac” … (last time I buy a cider game). So any idea or did I just waste 60$ on a game ? :) .

    I’m really sorry if this is in a totally wrong place, I couldn’t figure where to ask my question, everybodies here seems to really know what they’re talking about, when I’m mostly lost. Thanks for everything ;)

  96. Danieladam
    January 27th, 2010 | 8:28 pm

    Any update on SL 10.6+ working with ATI mobilities? I’m under the assumption they can work with 10.5.X. Any update would be appreciated.

    ATI Mobility Radeon 4650 HD to be exact..

  97. mac_n_cheeze
    February 1st, 2010 | 10:07 pm

    Hi Netkas,

    I’ve followed your efforts since the beginning and have derived great benefit from your work. I’d like to extend my deepest appreciation for your time and talent!

    Just built a hackintosh with a Gigabyte P55M-UD2 motherboard, Intel Core i5 and an ATI 4670 graphics card, I’m close to having a great system. Using your “beta booter” I’m able to get full support for the ATI 4670 without any other modifications (I’ve not needed to tweak any of the kernel extensions) but my system runs at 1.5x speeds.

    This is a known issue with the P55 chipset and there are other bootloaders that address the speed problem but none give me the support I need for the ATI 4670.

    Netkas, please, is there any way that I can get the source code for your “beta booter” so that I can apply the P55 fix while retaining full support for my ATI 4670? This will complete my build and give me an almost totally vanilla system.

    Once again, thank you so much for all you do for the OS X community, live long and prosper.

    mac_n_cheeze.

  98. Lavroff
    February 4th, 2010 | 12:48 am

    E-e-e-e-e-e-e-!!!!!!!! It’s alive!!! Asus EAH 4650 works perfectly!!! Оно живое, товарисчи!!!! Установил ATI 4600 contrler, ATI framebuffer, ATIRadeon X2000 и ATIsupport в Sys/Lib/Ext, boot кинул в корень/ и в Extra/, GraphicsEnabler = y, перезагрузил, выковырял из S/L/E 4600controller и X2000 на рабочий стол, прописал свой ID (94981002) и проинсталил заново, поправил права, перезагрузился и получил черный экран… Поменял выход с DVI -> VGA, перезагрузился и.., чуть не расплакался от счастья!!! Система видит карточку как 4600 (до этого видела как 4650, видела бл*ть, но не работала), производительность правильная приложения работают адекватно, разрешений экрана с запасом! Я счастлив!!! НЕТКАС!!! Спасибо тебе огромнейшее!!!

  99. February 5th, 2010 | 7:55 pm

    thanks very much~~

  100. Christian
    February 7th, 2010 | 10:51 pm

    Damn… with all you pro’s talking about that driver stuff using loads of buzzwords, I feel like a complete idiot. I am used to PC’s and trying to transition to Mac. Mainly because I thought it might be a great idea switching from VIsual Studio and Windows Mobile to Xcode and iPhone / iPod Touch. :)

    However… I bought the Mac OSX 10.6 Upgrade DVD and installed it to my Dell Studio 1535 Notebook using Empire EFI. It was pretty easy… and I even got wlan to work. However… I am too damn stupid to get my video card recognized and to work with more than 1024×768 (how many times did you hear that already?)

    I believe I did a good job in finding this website however, lol (all that new keywords…).

    So. My dell seems to have an ATI Radeon Mobility 4350 (95c4).

    I believe I saw that people were able to get it up and running with the information provided here. However, I am not able to use these information because I don’t understand the necessary procedures yet.

    If at all possible, can anyone please provide me with detailed instructions about how to get this card working?

    Thanks for reading this :)
    Chris.

  101. calabuig
    February 19th, 2010 | 11:22 am

    Hello, I need these files:

    http://rapidshare.com/files/297629498/ATI4x00Controllers-Boot-Netkas_Beta.zip

    but I cannot access to rapidshare?
    Are they available anywhere else?
    Thanks!

  102. jaj989@hotmail.com
    March 5th, 2010 | 6:15 am

    XFX hd4650 1 gig ram working 10.6.2 QE/CI working!!!

  103. March 7th, 2010 | 9:56 pm

    Great job!

    I need a little help.
    I have an acer aspire x3810 (intel P43, Q9300, ATI
    HD4350, Realtek AL888HD).
    I’ve tried several bootloaders, etc. efi empire.
    Now I swich the my Hack boot for your boot..
    I get to start the 10.6.2 but I do not burden the graphics driver and I do not recognize the monitor. The I get maximum resolution amending the com.apple.Boot.plist is 1400×1050 though indicated 1920×1080.
    Yours trying to download files from the links rapidshare, but no longer exist.

    Need your help please.

    Thanks, Thanks, Thanks …

  104. zohaer
    March 10th, 2010 | 11:23 pm

    hi
    any news or ideas about getting the QE or native display enabling in ati 4330 ???
    plz help
    thanks

  105. aggi
    March 13th, 2010 | 12:35 pm

    download link is not working .. i would be grateful if you could upload file again.. thanks

  106. dj
    March 20th, 2010 | 5:58 pm

    hey this is dj i have ati 4350 can any one give me a step by step guide to changing the device id …………..and a new link to all the files………mail me at djjivin@gmail.com

  107. March 27th, 2010 | 10:50 pm

    hey,
    could someone put bootloader and working kext on site.
    The download link DONT WORK!

  108. andrei
    March 29th, 2010 | 3:22 pm

    hey,
    I have too ATI Radeon 4350 geaphic card and i would be grateful if any one can give me a step by step guide to changing the device id … and also a link to all the files. Mail me at andrei.mobile@gmail.com

  109. April 16th, 2010 | 11:12 pm

    [...] booting with GraphicsEnabler=yes. When that dont works. try this: netkas.org Drivers for Radeons 46×0/45×0/43×0 iMick Pro: Moederbord: Asus P5L-VM 1394 Processor Intel Core 2 Duo Videokaart nVidia 7600 GS, [...]

  110. Peter
    April 19th, 2010 | 10:32 pm

    Hey there netkas,

    Any chance an XFX HD 4670 would work in a Mac Pro 3,1 at all?

    Thanks!

  111. SoNy
    April 21st, 2010 | 9:05 am

    Hi, I have ATI Radeon 4350 geaphic card, can send me to email ATI4×00Controllers-Boot-Netkas_Beta.zip please…

    Link rapidshare not work…

  112. SoNy
    April 21st, 2010 | 9:06 am

    Sorry, my email is: ssonyz@gmail.com

  113. Waston
    April 26th, 2010 | 9:11 am

    Netkas Any GOOD news for HD2600TX Pcie users on Snow?
    THNKS….

  114. Freedo
    May 2nd, 2010 | 2:34 pm

    Can anyone reupload this archive? Please

    http://rapidshare.de/files/48573335/boot_4600_4500_4300.zip.html

    Thanks ;)

  115. Marley05
    May 11th, 2010 | 9:32 pm

    thanks for the kexts they worked well with my his hd4650 iv got full res and qe working
    only thing is that i cant get dual monitors working only mirror even tho it says No on my system???

    im using dvi2vga x2 with this card
    thanks in advance!

  116. May 12th, 2010 | 10:48 am

    [...] mij kan je zo ie zo niet de vga poort gebruiken bij ati kaarten. netkas heeft voor de kaart wel drivers asus P5W DH Q6600 ATI 3870 512MB efix Dell 6400 core2duo intel [...]

  117. farhan
    May 14th, 2010 | 11:33 am

    links are dead! what should we do then? i’m stuck with this issue and dont know what to do,could anyone plz mail me the files or help me out in here? anyone?????

  118. lilizblack
    May 25th, 2010 | 11:48 pm

    I tried this with my Ati Radeon 4350 and I get kernel Panics with AtiRadeonx2000.kext

    Please help.

  119. TonyBarrio
    June 17th, 2010 | 11:32 pm

    BLACKSCREEN

  120. June 18th, 2010 | 11:01 pm

    link doesn’t work anymore does anyone have a link to these files, or anyway of emailing them to mellexx@live.com thanks

  121. June 20th, 2010 | 12:03 pm

    [...] netkas.org Drivers for Radeons 46×0/45×0/43×0 GA-EX58-UD5, Snow Leopard retail, 2GB 2100MHZ DDR3 ram, 5770 1GB Sapphire Grafische kaart. (nog niet aan de praat ) Chameleon RC4 en Windows 7 RTM. Patriot Warp V2 64GB SSD. http://youtube.com/osx86tutorials Antwoord met Citaat   + Plaats een Reactie [...]

  122. jexm
    June 24th, 2010 | 4:08 am

    Why I can not do it?
    help me please!!!

  123. reeve24
    June 24th, 2010 | 8:20 am

    any support on ATI Radeon Mobility HD4570?
    i have 4500 series on my System profiler but still stock on 1204×768 stretch screen resolution.. and my QE/CI won’t work.
    any help?

  124. Kexit
    June 26th, 2010 | 11:23 am

    Give a link! Rapidshare link is broken!

  125. wescleyprodutor
    June 28th, 2010 | 6:33 pm

    obrigado

  126. Kash72
    July 4th, 2010 | 9:05 pm

    Hey netkas the link is totally dead.Give us a chance to wake up our ati4650.
    Please do refresh the link.10x 4 ur gr8 work.

    ///all you need is pc_efi v 10.6, or u can try aty_init from 5800 post

  127. Kash72
    July 5th, 2010 | 7:06 pm

    :( I tried both but still no hope.
    All i can get ati 4890 with 256 MB Vram without QE/CI,but have HIS 1GB ati 4650 :) I also tried different variations and lots of stuffs.My onboard VGA fully working BTW.
    I’ll continue to pray 4 GOD and pray 4 YOU.

  128. TonyBarrio
    July 7th, 2010 | 2:00 am

    LINK DEAD MMG

  129. Kash72
    July 7th, 2010 | 9:53 pm

    Guess what….
    Changing the dvi port completely solved my problem.
    Everything seems OK.
    You’re still THE MAN.

  130. Rashad
    July 24th, 2010 | 10:03 am

    Can anybody pls provide a working link for the booter & Drivers.The following link is broken

    “http://rapidshare.de/files/48573335/boot_4600_4500_4300.zip.html”

  131. Douby
    August 6th, 2010 | 11:16 am

    Search for driver:

    Chipsatz-Modell: ATI Radeon 4300 Mobility Series
    Typ: GPU
    Bus: PCIe
    Steckplatz: Slot-1
    PCIe-Lane-Breite: x16
    VRAM (gesamt): 256 MB
    Hersteller: ATI (0×1002)
    Geräte-ID: 0×9552
    Versions-ID: 0×0000
    ROM-Version: 113-B7710C-176
    EFI-Treiberversion: 01.00.318

  132. Mr. MAC
    August 11th, 2010 | 2:46 pm

    The link is dead! Could you please reupload netkas? Or send it to my e-mail?
    Thanks in advance.

    Mr. MAC

  133. Will
    August 17th, 2010 | 10:29 pm
  134. Capz
    August 23rd, 2010 | 11:51 am

    Hello!

    Big thanks to – http://osx86.net/f19/guide-ati-radeon-hd46x0-t6193/post48533.html
    After 2 days of hard trying (got only Black Screens or Glichy graphics) I finally got fully working Asus HD4670 512MB, ID 1002:9490!

    My setup:
    iATKOS S3, boot_flicker, monitor connected to DVI2VGA dongle (VGA out doesn’t work, except when I plug DVI2VGA dongle (without monitor), but then I get fancy colors).

    I also installed 10.6.4 update with success!

    Steps:

    1. Installed iATKOS S3 with integrated graphics card (because with HD4670 after installation I got Black screen, even in safe mode)
    (options used: PC EFI 10.6, Graphics Enabler, voodoo HDA, NTFS-3G, everything else left by default)
    2. edit /Library/Preferences/SystemConfiguration/com.apple.Boot.plist
    add pmVersion=20 (in correct form) needed for 10.6.4 update kernel panic
    3. rename original /boot to /boot2
    4. extract boot_flicker and copy boot file to root folder
    5. install updates
    6. restart PC and change graphics card to HD4670
    7. connect DVI2VGA dongle and monitor to it
    8. Beautifully running MacOS :)

    edit.

    9. There is a Apple released kext update. Installed it and everything is still running beautifully! :)

  135. November 9th, 2010 | 8:21 pm

    [...] [...]

  136. SweetW0R
    November 23rd, 2010 | 12:53 pm

    в чем сложность создания драйвера для ATI Mobility Radeon HD4570 и вообще для ATI Mobility? есть смысл ждать? и если да то какого типа решения?

  137. SweetW0R
    November 23rd, 2010 | 11:47 pm

    RadeonHD.kext делает разрешение родное для моего ASUS K50AB (все работает осталось только ATI Mobility Radeon HD4570 QE) Возможноли доделать RadeonHD для ATI Mobility Radeon HD4500 Series?

  138. SweetW0R
    November 23rd, 2010 | 11:56 pm

    RadeonHD.kext – только разрешение! Не делает скриншот! Не просматривает фото! Тормозит Вебкам! Тормозит видео! Ув. NETKAS есть смыс ждать решения от вас? Я буду ждать ответа здесь) Спасибо)

  139. SweetW0R
    December 25th, 2010 | 11:12 pm

    ?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

  140. Mustafa
    April 11th, 2011 | 11:20 am

    Dear Forum community,

    I kindly request help on following problem.

    I have a new desktop PC which I use as a multi boot machine. I have a W7, two XPs and two Linux distros smoothly working in one. I am now trying to add iAtkos s3.
    My motherboard is P5K and the bios is crossflashed with P5KR bios in order to enable the ACHI mode under SATA options. I have 2 HDDs and they are partitioned by MBR method not GPT. I create the SL install partition with iAtkos install DVD.
    My CPU is Intel Core2Duo E 7500, 2.9 Ghz. and graphic card is Ati Radeon (HIS branded) HD 4670, 512 MB with dual DVI. I have no VGA plug.
    During installation I choose default options. I choose PC-EFI, graphic enabler and Chameleon RC5. The
    Installation went normally. After restart, now I can here a nice music but no graphic response. (Total blank screen) As I guess, the problem is graphic card kext.

    I am not experienced on Mac OSX, unfortunately. I read a lot on Insanelymac, Netkas, Tonymacx86 and Osx86 forums during last 15 days. It just makes me more confusing. It is so hard to find exact driver and information among millions of topics and details.

    Can you please help me and describe simply, how can I make my graphic card work normally.

    Any help is highly appreciated. Thanks.

  141. Павел
    May 13th, 2011 | 1:49 pm

    I could not download files, can you upload it again?..

  142. July 10th, 2011 | 9:33 pm

    [...] [...]

  143. July 17th, 2011 | 4:14 pm

    [...] [...]

  144. White
    December 9th, 2011 | 1:30 am

    So, any hope about Mobility (4530)

  145. March 20th, 2012 | 12:57 am

    [...] [...]

  146. March 27th, 2012 | 8:15 pm

    [...] to install lion ? Take a look to this http://netkas.org/?p=284 Last edited by Justindelta; Today at 20:14. Dell inspirion 1564 ATI Mobility Radeon [...]

Leave a reply