netkas.org

OpenSource is good

Yeah, it’s very good.

some new mods for fakesmc to monitor different temps of your pc – link.

IntelThermal – Intel CPU temperature monitoring.
LPCMonitor – temperatures and fans from ITE, Winbond and Fintek controllers.
TZplugin – temperature from ACPI device “Thermal Zone”

Comments

  1. Gusar
    May 29th, 2010 | 10:57 pm

    Ну и зачем эта галиматья нужна? Биос материнки и сам в состоянии приглядеть за температурным режимом.

  2. May 29th, 2010 | 11:22 pm

    Netkas, can FakeSMC count the coolers RPM?

  3. Perkelle
    May 30th, 2010 | 4:08 pm

    Что-то та ерунда даже не смогла температуру процов увидеть на EP45-DS3P

  4. cyberdog
    May 30th, 2010 | 4:55 pm

    the last version
    with GA-EP45-DS3L + 10.6.3
    test OK
    you can see that : http://l.antoine.free.fr/Capture.png

  5. May 30th, 2010 | 5:46 pm

    Open Source is good 😀

    Tested and confirmed working showing fan speed in iStat. Just a note for testers- this is yet experimental, and make sure to use with caution. 😉

  6. Andreas / mitch germany
    May 30th, 2010 | 5:57 pm

    Only the version without V38 in name works for me (GA-EP35) and shows all Temps (CPU + Chipset) . The V38 only shows CPU temp.
    Also GPU temp (Nvidia 8800GTX) is shown – but is fixed at 71 Celius and did not change under gpu loads. I tried also to use that Nvidia GPU temp kext but if i kextload that, the istat GPU temp disapers. How is usage of that nvidia gpu temp .kext ?
    Q: I am member of that forum (where the diss about that is running) but cant post any question there. Is there something limit in that thread ?

  7. CrazyJAT
    May 30th, 2010 | 9:53 pm

    This is off topic, but since registration is closed on your forum, what is the best way to post questions on your forum?

  8. netkas
    May 30th, 2010 | 9:58 pm

    It’s closed due to reasons – inactivity and spam.

    you better post a Q on insanelymac forum

  9. crystal
    June 1st, 2010 | 2:13 am

    yeap ,It’s really Good in my GA- EP43 DS3 Q6600

  10. atlee
    June 1st, 2010 | 11:31 am

    I do think Opensource is good but from what i’ve read the plugins do more bad then good, maybe wait till a more final bug free version.

  11. Andreas / mitch germany
    June 1st, 2010 | 1:07 pm

    Hi, now link is dead . So not even an reading that posts is possible.
    Has Thread link changed ?

  12. Roger_CWB
    June 1st, 2010 | 5:51 pm

    Im still with Netkas FakeSMC 127 KB against 1.2 MB and works.

  13. scififan68
    June 2nd, 2010 | 5:19 am

    Latest Revision works on my AMD Acer Aspire T180: http://i183.photobucket.com/albums/x148/scififan68/temps.png

  14. Pixar
    June 4th, 2010 | 6:21 pm

    Как всегда:
    “Ну и зачем эта галиматья нужна? Биос материнки и сам в состоянии приглядеть за температурным режимом.”

    Гусар как всегда уверен что его мнение самое главное в сообществе! Все никак не привыкнет к своей роли – жалкого продавца DSDT.

    ///на личности не переходим, ок ?

  15. D.J.KUTMASTA CURT
    June 5th, 2010 | 3:14 am

    THANK YOU SO MUCH FOR YOUR EFFORTS. I WAS LUCKY MY FIRST TRY, INSTALLING IPC 10.5.6 ON AN IBM THINKCENTRE. i TRIED TO DOWNLOAD I TUNES AND GOT A KERNEL PANIC. TRIED TO RE-INSTALL BUT COULDNT REMEMBER THE COMBO OF KEXTX AND PATCHES ID USED.
    DID SOME RESEARCH, AND CAME ACROSS YOUR NAME. WIKIPEDIA. THE INFO I RECIEVED LED ME TO INSTALL A PATCH YOUR CREATED AND BAMMM!!! ALL IS WELL. THANX AGAIN. DASVIDANYA.

  16. macfoern
    June 6th, 2010 | 7:01 pm

    very good…rev110 is working! woohoo
    GA-EP35-DS3R Rev.2.1 Bios.F4
    10.6.3 + DSDT + GTS250, fakesmc.kext in S/L/E
    THX A LOT!

  17. June 7th, 2010 | 4:08 pm

    Netkas, id like to voice chat with you if possible trough ichat or skype. I need to better understand and be better understood. Please enter in contact trough the mail i left here, if possible and if you are available.
    Thank you very much for your attention
    regards from brasil,
    Cartri

  18. cyberdog
    June 11th, 2010 | 7:56 pm

    A new version, 2.7 with a lot of modifications but my english is too poor to read.

  19. b00bl1k
    June 13th, 2010 | 3:36 pm

    Pixar: Никак до сих пор не поймете, ваше мнение здесь лишнее! Не нравится, иди на другой сайт или пиши сам софт, какого черта в комментах мусоришь!

    Увидел температуру на на своем мультимедиа комбайне GA G31M-S2L – Thanks!

  20. Fixer
    August 11th, 2010 | 9:29 pm

    GUSAR, пошел нахуй, полудорок, если тебе не надо, то шагай мимо и не хуй тут свою ботву каждадневную поднимать.

  21. Fixer
    August 11th, 2010 | 9:31 pm

    b00bl1k, тебе я говорю тоже самое, что и гусару.

  22. nesnfsn
    August 16th, 2011 | 7:54 am

    After copying files into /E/E, do we need to run any commands, such as repairing permissions, rebuilding extensions.mkext, other commands?

    Would like to know before I mess up my installation.

  23. March 11th, 2012 | 9:55 pm

    […] you are using a hackintosh rather than original Apple hardware you need to have Netkas’ fakesmc.kext installed rather than the overcome […]

Leave a reply